Aladdin's 15% SDS-PAGE Resolving Gel Master Mix contains almost all reagents required for the preparation of 15% SDS-PAGE resolving gels, except for polymerization catalysts such as ammonium persulfate and TEMED.Aladdin's SDS-PAGE Resolving Gel Master Mix series can be used to prepare 5 common concentrations of gels
Precautions：
Ammonium Persulfate or its substitute (, ST005) and TEMED are required but not provided in this product.This product contains Acr-Bis which is potentially neurotoxic. Please take effective measures to avoid direct contact with the human body or inhalation.This product is for R&D only. Not for drug, household, or other uses.For your safety and health, please wear a lab coat and disposable gloves during the operation.
Instructions for Use：
1.According to the size of a target protein, decide an appropriate concentration of SDS-PAGE resolving gel. Please refer to the table below.SDS-PAGE Resolving Gel Concentration Optimal Separation Range6%50-150kD8%30-90kD10 -80kD12%12-60kD15%10-40kD2.Prepare a 10% ammonium persulfate solution with ddH2O or other high-purity water. Solution of ammonium persulfate or its substitute is prone to failure and should be prepared freshly or kept frozen for multiple uses.3.Prepare the resolving gel according to the table below. For example, add 100μl of 10% ammonium persulfate and 4μl of TEMED into 10ml of 15% SDS-PAGE Resolving Gel Master Mix, mix well, and immediately pour into gel cassette. Overlay with the top layer of water-saturated butanol, isopropanol, 0.1% SDS or distilled water. Leave at room temperature (~25℃) until fully solidified (usually within 10-30 minutes). Note: The amount of polymerization catalyst in the table below is recommended for polymerization at 25℃. It can be adjusted appropriately according to the temperature. For example, when the room temperature is lower than 20℃, add more TEMED and 10% ammonium persulfate appropriately to promote gel solidification. ReagentsVolume of each component (ml) required for different volumes of SDS-PAGE resolving gel15% SDS-PAGE Resolving Gel Master Mix5101520305010% ammonium persulfate or its substitute0.050.10.150.20.30.5TEMED 0.0020.0040.0060.0080.0120.024.After complete polymerization of the resolving gel, remove the liquid used for sealing, and then prepare the SDS-PAGE stacking gel with 's SDS-PAGE Stacking Gel Master Mix .5.If the prepared gel is not to be used on the same day, it can be stored at 4℃ for 1-2 days.Related Products:产品编号产品名称包装P0012ASDS-PAGE Gel Preparation Kit30-50 gelsP0012ACSDS-PAGE Gel Quick Preparation Kit30-50 gelsP0670-250ml10% SDS-PAGE Resolving Gel Master Mix250mlP0670-500ml10% SDS-PAGE Resolving Gel Master Mix500mlP0672-250ml12% SDS-PAGE Resolving Gel BufferMaster Mix250mlP0672-500ml12% SDS-PAGE Resolving Gel BufferMaster Mix500mlP0675-250ml15% SDS-PAGE Resolving Gel Master Mix250mlP0675-500ml15% SDS-PAGE Resolving Gel Master Mix500mlP0676-250ml6% SDS-PAGE Resolving Gel Master Mix250mlP0676-500ml6% SDS-PAGE Resolving Gel Master Mix500mlP0678-250ml8% SDS-PAGE Resolving Gel Master Mix250mlP0678-500ml8% SDS-PAGE Resolving Gel Master Mix500mlP0683-250mlSDS-PAGE Stacking Gel Master Mix250mlP0683-500mlSDS-PAGE Stacking Gel Master Mix500mlP06866% SDS-PAGE Gel SuperQuick Preparation Kit30-50 gelsP06888% SDS-PAGE Gel SuperQuick Preparation Kit30-50 gelsP069010% SDS-PAGE Gel SuperQuick Preparation Kit30-50 gelsP069212% SDS-PAGE Gel SuperQuick Preparation Kit30-50 gelsP069515% SDS-PAGE Gel SuperQuick Preparation Kit30-50 gelsST005Ammonium persulfate substitute (APS substitute)10gST728TEMED Substitute10ml
Product Specifications
Storage Temp
Store at 2-8°C,Protected from light
Shipped In
Wet ice
Stability And Storage
Store at 4℃ in the dark for up to 1 year.
Precautions：
TMB is irritating. Please take effective measures to avoid inhalation or direct contact with skin.
