Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

DOT Blot Protocol

Cut membrane, loading sample, blocking

1.According to the amount of sample to cut 8 cm × 6 cm nitrocellulose membrane. Gently draw on rectilinear reference lines per 1cm to separate the membrane into 48 grids, then marked with numbers.

2.Dilute the peptide into 5 ug/mL by 2 mL PBS (pH 7.4). Drop 2 uL the dilution slowly to the center of the grid . Adding sample order: the upper row is NP-pep , the nether row is P-pep . Each antigen should be loaded two grids. Place 30 min to dry.

3.According to the number to cut the membrane as a unit with two grids. Incubate the membrane in blocking buffer (5% non-fat milk in TBST (m/v)) for 1 hour at room temperature.


Antibody Dilution

1.The antibody should be diluted into 0.5 ug/mL by the blocking buffer.


Incubation Primary Antibody

1.Put the blocking membrane into the diluted antibody solution for 1 hour at room temperature.


Incubation secondary antibody

1.(HRP labeled goat anti rabbit Ig antibody)

2.Washing the membrane with TBST (pH 7.4) for 3-5 min.

3.Dilute the secondary antibody with the blocking buffer.

4.Incubation secondary antibody for 1 hour at room temperature.


Coloration and Developing

1.Washing the membrane with TBST (pH 7.4) for 3 - 5min.

2.Put the membrane into the substrate of HRP solution for coloration for 7 min.

3.Develop.

Was this helpful? No Be the first to vote!
    The page will load shortly, Thanks for your patience!