Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) - 1.1% in H₂O, surfactant-free, high-conductivity grade, high purity , CAS No.155090-83-8

Item Number

P475427

• Synonyms: 155090-83-8|E82258|A883673|POLY(3,4-ETHYLENEDIOXYTHIOPHENE)-POLY(STYRENESULFONATE),1.3-1.7% IN WATER
• Specifications & Purity: 1.1% in H₂O, surfactant-free, high-conductivity grade
• Legal Information: Agfa-Gevaert N.V. 产品Orgacon is a trademark of Agfa-Gevaert N.V.
• Storage Temp: Store at 2-8°C
• Shipped In: Wet ice

Product Description

Poly (3, 4-ethylenedioxythiophene) -poly (styrene sulfonate) (PEDOT: PSS) is a conductive polymer without a high boiling point solvent (HBS), formed by the electropolymerization of 3, 4-ethylenedioxythiophene in a poly (styrene sulfonate) (PSS) solution. PEDOT doped positive ions, PSS doped negative ions.

Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer without a high boiling solvent (HBS), that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It has the following properties that make it a viable polymer in organic electronics.Aqueous surfactant-free dispersion of high conductivity grade PEDOT:PSS polymer. Optimal performance in transparent conductive coatings may require addition of formulation ingredients (e.g. surfactants and high-boiling solvents).Conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.PEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), perovskite solar cells (DSSCs), organic light emitting diodes (OLEDs) and other biomedical sensors.Used to prepare highly transparent conductive coating formulations. Primary and secondary nucleation by introducing PEDOT:PSS in a hydrogel was studied.Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.