Click Here for 5% Off Your First Aladdin Purchase!

Poly(ethylene glycol) diacrylate - average Mₙ 4,000, contains MEHQ as inhibitor, high purity , CAS No.26570-48-9

  • average Mₙ 4,000, contains MEHQ as inhibitor
Item Number
P478146
Grouped product items
SKUSizeAvailabilityPrice Qty
P478146-250mg
250mg
Available within 8-12 weeks(?)
Production requires sourcing of materials. We appreciate your patience and understanding.
$49.90
P478146-1g
1g
Available within 8-12 weeks(?)
Production requires sourcing of materials. We appreciate your patience and understanding.
$139.90
P478146-5g
5g
Available within 8-12 weeks(?)
Production requires sourcing of materials. We appreciate your patience and understanding.
$499.90
View related series
Poly PEG

Basic Description

SynonymsEthylene diacrylate|Ethylene glycol diacrylate|2274-11-5|Ethylene acrylate|Acrylic acid, ethylene ester|Ethylenediacrylate|2-prop-2-enoyloxyethyl prop-2-enoate|26570-48-9|AC-PEG-AC|2-Propenoic acid, 1,2-ethanediyl ester|Acrylic acid, diester with ethylene
Specifications & Purityaverage Mₙ 4,000, contains MEHQ as inhibitor
Storage TempProtected from light,Store at -20°C,Argon charged
Shipped InIce chest + Ice pads
Product Description

High purity PEG diacrylates are commonly used in PEG-based hydrogels and crosslinking hydrophilic polymers.It is good for tissue engineering and 3D printing applications.

Names and Identifiers

IUPAC Name 2-prop-2-enoyloxyethyl prop-2-enoate
INCHI InChI=1S/C8H10O4/c1-3-7(9)11-5-6-12-8(10)4-2/h3-4H,1-2,5-6H2
InChi Key KUDUQBURMYMBIJ-UHFFFAOYSA-N
Canonical SMILES C=CC(=O)OCCOC(=O)C=C
Isomeric SMILES C=CC(=O)OCCOC(=O)C=C
WGK Germany 1
PubChem CID 75282

Certificates

Certificate of Analysis(COA)

Enter Lot Number to search for COA:

To view the certificate results,please click on a Lot number.For Lot numbers from past orders,please use our order status section

6 results found

Lot NumberCertificate TypeDateItem
H2427192Certificate of AnalysisAug 05, 2024 P478146
H2427231Certificate of AnalysisAug 05, 2024 P478146
H2427232Certificate of AnalysisAug 05, 2024 P478146
H2427233Certificate of AnalysisAug 05, 2024 P478146
H2427234Certificate of AnalysisAug 05, 2024 P478146
H2427235Certificate of AnalysisAug 05, 2024 P478146

Chemical and Physical Properties

SensitivityHeat sensitive;Light sensitive;Moisture sensitive
Refractive Index1.463
Melt Point(°C)32-37℃

Safety and Hazards(GHS)

Pictogram(s) GHS05,   GHS07
Signal Danger
Hazard Statements

H315:Causes skin irritation

H319:Causes serious eye irritation

H335:May cause respiratory irritation

H318:Causes serious eye damage

H317:May cause an allergic skin reaction

Precautionary Statements

P261:Avoid breathing dust/fume/gas/mist/vapors/spray.

P305+P351+P338:IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do - continue rinsing.

P280:Wear protective gloves/protective clothing/eye protection/face protection.

P302+P352:IF ON SKIN: wash with plenty of water.

P321:Specific treatment (see ... on this label).

P405:Store locked up.

P501:Dispose of contents/container to ...

P264:Wash hands [and …] thoroughly after handling.

P271:Use only outdoors or in a well-ventilated area.

P304+P340:IF INHALED: Remove person to fresh air and keep comfortable for breathing.

P403+P233:Store in a well-ventilated place. Keep container tightly closed.

P272:Contaminated work clothing should not be allowed out of the workplace.

P333+P313:IF SKIN irritation or rash occurs: Get medical advice/attention.

P362+P364:Take off contaminated clothing and wash it before reuse.

P264+P265:Wash hands [and …] thoroughly after handling. Do not touch eyes.

P305+P354+P338:IF IN EYES: Immediately rinse with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing.

P317:Get emergency medical help.

P337+P317:If eye irritation persists: Get medical help.

P332+P317:If skin irritation occurs: Get medical help.

P319:Get medical help if you feel unwell.

WGK Germany 1

Related Documents

Alternative Products

References

1. J Huang, Z Chen, C Wen, T Ling, Z Chen.  (2022)  Thermally assisted 3D printing of bio-polymer with high solute loading with improved mechanical properties.  Additive Manufacturing,    (59A): (103088).  [PMID:]

Solution Calculators